參考資訊:
https://www.triplespark.net/elec/periph/USB-FX2/eeprom/
https://www.triplespark.net/elec/periph/USB-FX2/software/
步驟如下:
1. 拔掉插銷後,連接USB到PC
2. 執行如下命令
$ sudo cycfx2prog prg:main.hex run Using ID 04b4:8613 on 002.019. Putting 8051 into reset. Programming 8051 using "main.hex". Putting 8051 out of reset.