微電腦 - iRiver Dicple D8 - Build U-Boot

步驟如下：

$ cd
$ wget https://github.com/steward-fu/website/releases/download/iriver-d8/mipseltools-gcc412-glibc261.tar
$ tar xvf mipseltools-gcc412-glibc261.tar
$ sudo mv mipseltools-gcc412-glibc261 /opt/
$ export PATH=/opt/mipseltools-gcc412-glibc261/bin:$PATH
$ mipsel-linux-gcc --version
    mipsel-linux-gcc (GCC) 4.1.2
    Copyright (C) 2006 Free Software Foundation, Inc.
    This is free software; see the source for copying conditions.  There is NO
    warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

$ cd
$ wget https://github.com/steward-fu/website/releases/download/iriver-d8/bootloader-jz4755_d8_uboot-2009.05.zip
$ unzip bootloader-jz4755_d8_uboot-2009.05.zip
$ cd bootloader-jz4755_d8_uboot-2009.05
$ make cetus_nand_config
$ make -j4

P.S. 因為UART1連接到WM8731，除非是要使用UART Debug，不然傳入console=ttyS1,57600n8會造成Kernel無法啟動