參考資訊:
https://github.com/RichCattell/Marlin
pins.h
#if MOTHERBOARD == 33 #define HEATER_1_PIN 8 #else #define HEATER_1_PIN 9 // EXTRUDER 2 (FAN On Sprinter) #endif
Configuration.h
#define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 1 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_BED 1
LCM顯示
接著加熱加熱板
連接方式
開始加熱