手機 - Fujitsu LOOX F-07C - x86 - 安裝Debian 7.0(LXDE)



1. 製作Debian 7.0 LXDE USB開機片
2. 開機進入BIOS(F12)並選擇USB開機
3. 安裝Debian 7.0系統








4. 安裝完成後,開啟Terminal並輸入如下指令建立資料夾

# apt-get update
# apt-get install xserver-xorg-video-fbdev xserver-xorg-video-modesetting linux-cpupower cpufrequtils
# mkdir /etc/X11/xorg.conf.d

5. 新增螢幕配置檔案

# vim /etc/X11/xorg.conf.d/20-gpudriver.conf
    Section "Device"
        Identifier "gma500_gfx"
        Driver "fbdev"
        Option "Rotate" "CW"
    EndSection

# vim /etc/X11/xorg.conf.d/40-monitor.conf
    Section "Monitor"
        Identifier "LVDS-0"
        Option "Rotate" "right"
    EndSection

# vim /etc/X11/xorg.conf.d/50-invertaxes.conf
    Section "InputClass"
        Identifier "Invert Touchscreen"
        MatchProduct "FUJITSU FOMA F07C"
        MatchIsTouchscreen "on"
        MatchDevicePath "/dev/input/event*"
        Option "SwapAxes" "true"
        Option "InvertX" "false"
        Option "InvertY" "true"
    EndSection

6. 設定開機後執行:畫面旋轉、跳過SDIO WIFI驅動程式匹配、CPU速度

# vim /etc/default/grub
    GRUB_CMDLINE_LINUX="fbcon=rotate:1 sdhci.debug_quirks=0x40 processor.ignore_ppc=1"

# grub-mkconfig -o /boot/grub/grub.cfg

7. 設定音效裝置(必須在Symbian模式下,使用Fn2 + 右鍵開啟Speaker)

# vim /etc/modprobe.d/snd_hda_intel.conf
    options snd-hda-intel enable_msi=0
    options snd-hda-intel model=auto

8. 設定最大CPU速度

# vim /etc/init.d/cpufrequtils
    GOVERNOR='ondemand'
    MIN_FREQ="600MHz"
    MAX_FREQ="1.20GHz"

9. 完成

# reboot