NUC977

flash nand


1. 設定PA0、PA1成USB啟動
2. 開啟CONFIG_ENV_IS_IN_NAND並編譯UBoot程式

$ vim include/configs/nuc970_evb.h
  48 #define CONFIG_SYS_USE_SPIFLASH
  49 #define CONFIG_SYS_USE_NANDFLASH
  50 #define CONFIG_SYS_NO_FLASH    // that is, no *NOR* flash 
  51 #define CONFIG_ENV_IS_IN_NAND 
  52 //#define CONFIG_ENV_IS_IN_SPI_FLASH 
  53 //#define CONFIG_ENV_IS_IN_MMC

3. 編輯env.txt

$ vim spi_env.txt
  bootcmd=nboot 0x7fc0 0 0x200000; bootm 0x7fc0
  baudrate=115200
  bootdelay=3
  ethact=emac
  ethaddr=00:00:00:11:66:88
  stderr=serial
  stdin=serial
  stdout=serial

4. 燒錄至NAND

$ sudo nuwriter -m nand -d NUC972DF62Y.ini -e 0xffffffff
$ sudo nuwriter -m nand -d NUC972DF62Y.ini -t env -a 0x80000 -w nand_env.txt -v
$ sudo nuwriter -m nand -d NUC972DF62Y.ini -t uboot -a 0x200 -w nand_spl/u-boot-spl.bin -v
$ sudo nuwriter -m nand -d NUC972DF62Y.ini -t data -a 0x100000 -w u-boot.bin -v
$ sudo nuwriter -m nand -d NUC972DF62Y.ini -t data -a 0x200000 -w arch/arm/boot/uImage -v

5. 設定PA0、PA1成NAND啟動


返回上一頁