(MIPS II) M200 (Newton1)
UART輸出
Baudrate: 57600bps
U-Boot 2013.07-00010-g30ab957 (Aug 08 2014 - 16:15:43) Board: newton (Ingenic XBurst JZ4775 SoC) DRAM: 256 MiB Top of RAM usable for U-Boot at: 90000000 Reserving 0k for U-Boot at: 8ffc6000 Reserving 814k for U-Boot at: 8fef8000 Reserving 65568k for malloc() at: 8bef0000 Reserving 32 Bytes for Board Info at: 8beeffe0 Reserving 128 Bytes for Global Data at: 8beeff60 Reserving 128k for boot params() at: 8becff60 Stack Pointer at: 8becff48 Now running in RAM - U-Boot at: 8fef8000 MMC: msc: 0, msc: 1 *** Warning - bad CRC, using default environment gpio_request lable = soft_i2c gpio = 131 gpio_request lable = soft_i2c gpio = 128 gpio_request lable = lcd_cs gpio = 73 canot request gpio lcd_cs gpio_request lable = lcd_rd gpio = 72 canot request gpio lcd_rd gpio_request lable = lcd_rst gpio = 85 canot request gpio lcd_rst gpio_request lable = lcd_bl gpio = 75 canot request gpio lcd_bl truly_tft240240_2_e panel display pin init truly_tft240240_2_e panel display on dump_lcdc_registers mcu init over. the cfg is 00000900 dump_lcdc_registers In: serial Out: lcd Err: lcd USB_udc_probe jz_dwc2_udc Mod: Normal boot mode. Net: No ethernet found. Hit any key to stop autoboot: 0 ret = 5