F1C200S >> Assembly

CCU


參考資料:
1. pdf
2. lichee
3. mangopi_r
4. allwinner
5. i2c-sunxi.c

System Bus


Bus Clock Tree


Base Address


暫存器


速度

模組預設範圍
CPU408MHz200MHz~2.6GHz
AUDIO24.571MHz20MHz~200MHz
VIDEO297MHz30MHz~600MHz
VE210MHz30MHz~600MHz
DDR312MHz24MHz~3GHz
PERIPH600MHz200MHz~1.8GHz

CPU速度計算公式

PLL = (24MHz*N*K)/(M*P)

N = 30
K = 1
M = 1
P = 1
PLL = (24MHz*30*1)/(1*1) = 720MHz

main.s

  .global _start
  
  .equiv CCU_BASE,         0x01c20000
  .equiv GPIO_BASE,        0x01c20800
  .equiv PLL_CPU_CTRL_REG, 0x0000
  .equiv CPU_CLK_SRC_REG,  0x0050
  .equiv PA,               (0x24 * 0)
  .equiv PORT_CFG0,        0x00
  .equiv PORT_DATA,        0x10
 
  .arm
  .text
_start:
  .long 0xea000016
  .byte 'e', 'G', 'O', 'N', '.', 'B', 'T', '0'
  .long 0, __spl_size
  .byte 'S', 'P', 'L', 2
  .long 0, 0
  .long 0, 0, 0, 0, 0, 0, 0, 0
  .long 0, 0, 0, 0, 0, 0, 0, 0
    
_vector:
  b reset
  b .
  b .
  b .
  b .
  b .
  b .
  b .
    
reset:
  ldr r0, =CCU_BASE
  ldr r1, =(1 << 31) | (29 << 8)
  str r1, [r0, #PLL_CPU_CTRL_REG]
1:
  ldr r1, [r0, #PLL_CPU_CTRL_REG]
  tst r1, #(1 << 28)
  beq 1b
   
  ldr r0, =CCU_BASE
  ldr r1, =(3 << 16)
  str r1, [r0, #CPU_CLK_SRC_REG]
 
  ldr r0, =GPIO_BASE
  ldr r1, =0x1000
  str r1, [r0, #(PA + PORT_CFG0)]
0:
  ldr r1, =0x08
  str r1, [r0, #(PA + PORT_DATA)]
  ldr r2, =100000
1:
  subs r2, #1
  bne 1b
  ldr r1, =0x00
  str r1, [r0, #(PA + PORT_DATA)]
  ldr r2, =100000
2:
  subs r2, #1
  bne 2b
  b 0b
  .end

完成


返回上一頁