CY7C68013

燒錄hex(eeprom)


參考資訊:
1. eeprom
2. CycFX2Prog

步驟如下:
1. 清除eeprom資料
2. 插上插銷並連接USB

3. 執行如下命令

$ lsusb
  Bus 002 Device 035: ID 04b4:8613 Cypress Semiconductor Corp. CY7C68013 EZ-USB FX2 USB 2.0 Development Kit

$ sudo fxload -D /proc/bus/usb/002/035 -I main.hex -c 0x01 -s Vend_Ax.hex -t fx2
  FX2:  config = 0x01, connected, I2C = 400 KHz
  Writing vid=0x04b4, pid=0x6473

P.S. fxload需要指定USB BUS位置(如:Bus 002 Device 035)


返回上一頁