Fujitsu F-07C >> x86

安裝Debian 7.0(LXDE)

---

1. 製作Debian 7.0 LXDE USB開機片
2. 開機進入BIOS(F12)並選擇USB開機
3. 安裝Debian 7.0系統








4. 安裝完成後，開啟Terminal並輸入如下指令建立資料夾

# apt-get update
# apt-get install xserver-xorg-video-fbdev xserver-xorg-video-modesetting linux-cpupower cpufrequtils
# mkdir /etc/X11/xorg.conf.d

5. 新增螢幕配置檔案

# vim /etc/X11/xorg.conf.d/20-gpudriver.conf
  Section "Device"
    Identifier "gma500_gfx"
    Driver "fbdev"
    Option "Rotate" "CW"
  EndSection

# vim /etc/X11/xorg.conf.d/40-monitor.conf
  Section "Monitor"
    Identifier "LVDS-0"
    Option "Rotate" "right"
  EndSection

# vim /etc/X11/xorg.conf.d/50-invertaxes.conf
  Section "InputClass"
    Identifier "Invert Touchscreen"
    MatchProduct "FUJITSU FOMA F07C"
    MatchIsTouchscreen "on"
    MatchDevicePath "/dev/input/event*"
    Option "SwapAxes" "true"
    Option "InvertX" "false"
    Option "InvertY" "true"
  EndSection

6. 設定開機後執行：畫面旋轉、跳過SDIO WIFI驅動程式匹配、CPU速度

# vim /etc/default/grub
  GRUB_CMDLINE_LINUX="fbcon=rotate:1 sdhci.debug_quirks=0x40 processor.ignore_ppc=1"

# grub-mkconfig -o /boot/grub/grub.cfg

7. 設定音效裝置(必須在Symbian模式下，使用Fn2 + 右鍵開啟Speaker)

# vim /etc/modprobe.d/snd_hda_intel.conf
  options snd-hda-intel enable_msi=0
  options snd-hda-intel model=auto

8. 設定最大CPU速度

# vim /etc/init.d/cpufrequtils
  GOVERNOR='ondemand'
  MIN_FREQ="600MHz"
  MAX_FREQ="1.20GHz"

9. 完成

# reboot

返回上一頁