RG Nano
如何透過ssh連線
參考資訊：
1. recovery-mode-commands
步驟如下：
1. 掛載USB DISK
2. 在根目錄下新增一個空白的檔案，檔案名稱必須是usbnet
3. 重新開機後，就可以透過ssh連線(root:funkey)
$ sudo dmesg -c
[54949.883106] rndis_host 2-1:1.0 enp0s20u1: unregister 'rndis_host' usb-0000:00:14.0-1, RNDIS device
[54950.083308] userif-2: sent link down event.
[54950.083312] userif-2: sent link up event.
[54951.181415] usb 2-1: new high-speed USB device number 20 using xhci_hcd
[54951.330016] usb 2-1: New USB device found, idVendor=1d6b, idProduct=0104, bcdDevice= 1.00
[54951.330020] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[54951.330022] usb 2-1: Product: FunKey S
[54951.330023] usb 2-1: Manufacturer: FunKey
[54951.330024] usb 2-1: SerialNumber: 12c000021509d3f2
[54951.332875] rndis_host 2-1:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-1, RNDIS device, 6e:70:7b:9b:99:af
[54951.396348] rndis_host 2-1:1.0 enp0s20u1: renamed from usb0
[54951.430279] IPv6: ADDRCONF(NETDEV_UP): enp0s20u1: link is not ready
$ sudo ifconfig enp0s20u1 169.254.137.100 netmask 255.255.255.0
$ ssh root@169.254.137.236
Restore saved volume
Restore saved brightness
Start frontend
root@FunKey:~# cat /etc/*release*
NAME="FunKey-OS"
VERSION="2.3.0 (Zen Zebu)"
ID=funkey
ID_LIKE=buildroot
PRETTY_NAME="FunKey-OS 2.3.0"
VERSION_ID="2.3.0"
HOME_URL="https://www.funkey-project.com/"
SUPPORT_URL="https://www.funkey-project.com/"
BUG_REPORT_URL="https://www.funkey-project.com/"
PRIVACY_POLICY_URL="https://www.funkey-project.com"
VERSION_CODENAME=Zen
UBUNTU_CODENAME=Zen
P.S. 刪除usbnet檔案就可以變回原本USB DISK的掛載方式
按下SELECT + L + R會顯示目前IP位址
