RG350

build pang


步驟如下:

$ cd
$ wget https://github.com/steward-fu/rg350/releases/download/v1.0/gcw0-toolchain.tar.gz
$ tar xvf gcw0-toolchain.tar.gz
$ sudo mv gcw0-toolchain /opt
$ export PATH=$PATH:/opt/gcw0-toolchain/usr/bin

$ wget https://github.com/steward-fu/rg350/releases/download/v1.1/pang.tar.gz
$ tar xvf pang.tar.gz
$ cd pang
$ make


返回上一頁