Miyoo
build kernel 4.14.0
編譯步驟如下:
$ cd $ wget https://github.com/steward-fu/miyoo/releases/download/v1.2/kernel.7z $ 7za x kernel.7z $ cd kernel $ make ARCH=arm CROSS_COMPILE=arm-linux- miyoo_defconfig $ make ARCH=arm CROSS_COMPILE=arm-linux- clean $ make ARCH=arm CROSS_COMPILE=arm-linux- -j8
燒錄到SPI Flash
sudo sunxi-fel -p spiflash-write 1048576 arch/arm/boot/dts/suniv-f1c500s-miyoo.dtb sudo sunxi-fel -p spiflash-write 1114112 arch/arm/boot/zImage
完成
U-Boot SPL 2018.01-gfcaa41c-dirty (Dec 18 2018 - 17:21:52) DRAM: 32 MiB Trying to boot from MMC1 Card did not respond to voltage select! mmc_init: -95, time 22 spl: mmc init failed with error: -95 Trying to boot from sunxi SPI U-Boot 2018.01-gfcaa41c-dirty (Dec 18 2018 - 17:21:52 +0800) for Miyoo handheld CPU: Allwinner F Series (SUNIV) Model: Miyoo Handheld DRAM: 32 MiB MMC: SUNXI SD/MMC: 0 SF: Detected w25q64cv with page size 256 Bytes, erase size 4 KiB, total 8 MiB *** Warning - bad CRC, using default environment In: serial@1c25400 Out: serial@1c25400 Err: serial@1c25400 Net: No ethernet found. starting USB... No controllers found Hit any key to stop autoboot: 0 SF: Detected w25q64cv with page size 256 Bytes, erase size 4 KiB, total 8 MiB device 0 offset 0x100000, size 0x4000 SF: 16384 bytes @ 0x100000 Read: OK device 0 offset 0x110000, size 0x400000 SF: 4194304 bytes @ 0x110000 Read: OK ## Flattened Device Tree blob at 80c00000 Booting using the fdt blob at 0x80c00000 Loading Device Tree to 816fb000, end 816ffdd7 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.0-miyoo (steward@debian) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #1 Tue Dec 18 17:48:10 CST 2018 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: Miyoo Handheld [ 0.000000] Memory policy: Data cache writeback [ 0.000000] random: fast init done [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 8128 [ 0.000000] Kernel command line: console=ttyS1,115200 earlyprintk panic=5 rootwait root=/dev/mmcblk0p2 earlyprintk rw rootfstype=ext4 [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Memory: 22680K/32768K available (6144K kernel code, 208K rwdata, 1356K rodata, 1024K init, 248K bss, 10088K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc2800000 - 0xff800000 ( 976 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc2000000 ( 32 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0700000 (7136 kB) [ 0.000000] .init : 0xc0900000 - 0xc0a00000 (1024 kB) [ 0.000000] .data : 0xc0a00000 - 0xc0a34120 ( 209 kB) [ 0.000000] .bss : 0xc0a392ec - 0xc0a77684 ( 249 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000045] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000111] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000612] Console: colour dummy device 80x30 [ 0.000700] Calibrating delay loop... 203.16 BogoMIPS (lpj=1015808) [ 0.070235] pid_max: default: 32768 minimum: 301 [ 0.070575] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.070625] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.072032] CPU: Testing write buffer coherency: ok [ 0.073616] Setting up static identity map for 0x80100000 - 0x80100058 [ 0.076036] devtmpfs: initialized [ 0.082683] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.082751] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.083002] pinctrl core: initialized pinctrl subsystem [ 0.084983] NET: Registered protocol family 16 [ 0.086478] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.088334] cpuidle: using governor menu [ 0.112352] SCSI subsystem initialized [ 0.112674] usbcore: registered new interface driver usbfs [ 0.112828] usbcore: registered new interface driver hub [ 0.113029] usbcore: registered new device driver usb [ 0.113457] pps_core: LinuxPPS API ver. 1 registered [ 0.113490] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti[ 0.113556] PTP clock support registered [ 0.114005] Advanced Linux Sound Architecture Driver Initialized. [ 0.117082] clocksource: Switched to clocksource timer [ 0.142919] NET: Registered protocol family 2 [ 0.144326] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.144408] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.144461] TCP: Hash tables configured (established 1024 bind 1024) [ 0.144719] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.144784] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.145224] NET: Registered protocol family 1 [ 0.146196] RPC: Registered named UNIX socket transport module. [ 0.146239] RPC: Registered udp transport module. [ 0.146258] RPC: Registered tcp transport module. [ 0.146276] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.147568] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.149342] Initialise system trusted keyrings [ 0.149903] workingset: timestamp_bits=30 max_order=13 bucket_order=0 [ 0.166835] NFS: Registering the id_resolver key type [ 0.166948] Key type id_resolver registered [ 0.166975] Key type id_legacy registered [ 0.179655] Key type asymmetric registered [ 0.179699] Asymmetric key parser 'x509' registered [ 0.179910] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.179944] io scheduler noop registered [ 0.179963] io scheduler deadline registered [ 0.180678] io scheduler cfq registered (default) [ 0.180714] io scheduler mq-deadline registered [ 0.180734] io scheduler kyber registered [ 0.181794] sun4i-usb-phy 1c13400.phy: Couldn't request ID GPIO [ 0.191602] suniv-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.360150] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.386849] 1c25000.serial: ttyS0 at MMIO 0x1c25000 (irq = 22, base_baud = 6250000) is a 16550A [ 0.409521] 1c25400.serial: ttyS1 at MMIO 0x1c25400 (irq = 23, base_baud = 6250000) is a 16550A [ 0.888614] console [ttyS1] enabled [ 0.897880] SCSI Media Changer driver v0.25 [ 0.903405] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.910059] ehci-platform: EHCI generic platform driver [ 0.915534] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.921833] ohci-platform: OHCI generic platform driver [ 0.927483] usbcore: registered new interface driver usb-storage [ 0.933932] musb-sunxi 1c13000.usb: Invalid or missing 'dr_mode' property [ 0.940872] musb-sunxi: probe of 1c13000.usb failed with error -22 [ 0.947427] i2c /dev entries driver [ 1.007216] sunxi-mmc 1c0f000.mmc: base:0xc2857000 irq:18 [ 1.014616] usbcore: registered new interface driver usbhid [ 1.020319] usbhid: USB HID core driver [ 1.041735] NET: Registered protocol family 17 [ 1.046422] Key type dns_resolver registered [ 1.053273] Loading compiled-in X.509 certificates [ 1.069711] ALSA device list: [ 1.072713] #0: Loopback 1 [ 1.076766] Waiting for root device /dev/mmcblk0p2... [ 1.205248] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.218208] mmc0: new high speed SDHC card at address aaaa [ 1.224727] mmcblk0: mmc0:aaaa SU04G 3.69 GiB [ 1.244690] mmcblk0: p1 p2 [ 1.319973] EXT4-fs (mmcblk0p2): recovery complete [ 1.328649] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.336847] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 1.346585] devtmpfs: mounted [ 1.354094] Freeing unused kernel memory: 1024K [ 1.740520] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered Starting logging: OK Initializing random number generator... done. / # uname -r 4.14.0-miyoo
完成